INA156EA/2K5G4 Overview
A VSSOP case is used to package the op amp. INSTRUMENTATION AMPLIFIER-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape and Reel case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Instrumentation Amplifier device. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 8mV. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. There are a total of 2 elements in this linear amplifier. I would like to point out that this electrical component is capable of working from a voltage below 5.5V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.7V at all times. There is a quiescent current of 1.8mA in this operational amplifier circuit. 10 TΩ should be the range of resistance for the linear amplifier.
INA156EA/2K5G4 Features
8 Pins
supply voltage of 5V
33.98dB voltage gain
Resistance of 10 TΩ
INA156EA/2K5G4 Applications
There are a lot of Texas Instruments
INA156EA/2K5G4 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
