INA155UA/2K5 Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. We are approaching the 8h termination of the year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. There are 8 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~125°C . A supply current of 1.7mA can be used to operate this linear amplifier. Maintain 33.98dB as the voltage gain. On this buffer amplifier, there are 1 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. It is possible to count 2 elements on this buffer amplifier. The linear amplifier is packaged by using a TR axis. There is an 1.7mA quiescent current running through op amp ic. Op amp resistance should stay within the range of 10 TΩ.
INA155UA/2K5 Features
8 Pins
supply voltage of 5V
33.98dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
INA155UA/2K5 Applications
There are a lot of Texas Instruments INA155UA/2K5 Instrumentational OP Amps applications.
- Image computer boards
- pH (acidity)
- Large motor controllers
- Gaming industry
- Signal filtering
- Fission chambers
- Integrator circuits
- Addition operation circuits
- Weak signal detection
- Commercial audio systems
