INA152EA/2K5 Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a Differential-type. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape (CT) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 10V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 500μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 0dB. This op amp ic has 1 circuits. There are a total of 2 channels available on the op amps. An buffer amplifier is packed in a TR-shape according to the design. The quiescent current is 500μA. It is important that the op amp resistance stays within the range of 80kOhm.
INA152EA/2K5 Features
8 Pins
supply voltage of 10V
0dB voltage gain
Resistance of 80kOhm
INA152EA/2K5 Applications
There are a lot of Texas Instruments
INA152EA/2K5 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
