INA148UAG4 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. There is a Tube case that is delivered with the instrumentation amplifiers. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 260μA and 10 . There should be no change in the voltage gain. Buffer op amp is equipped with 1 channels on the device. As a result, linear amplifier's quiescent current is 600μA. Instrumentation amplifier resistance should stay within the range of 2MOhm.
INA148UAG4 Features
8 Pins
supply voltage of 5V
0dB voltage gain
Resistance of 2MOhm
INA148UAG4 Applications
There are a lot of Texas Instruments INA148UAG4 Instrumentational OP Amps applications.
- Computer workstations
- Large motor controllers
- Image computer boards
- Vehicle electronics
- Active probe
- Industrial applications including automation
- Proportional counter tubes
- Measurements of Wheatstone bridge
- Laptop
- E-book readers
