INA148UA/2K5 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 8 terminations. There are a total of 8 pins on this op amp. Please take in mind that op amp should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Maintain 0dB as the voltage gain. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. An buffer amplifier is packed in a TR-shape according to the design. As a recommendation, this electronic component should be used with a power supply that can deliver 260μA. Linear amplifier has a quiescent current of 600μA. It is important that the linear amplifier resistance stays within the range of 2MOhm.
INA148UA/2K5 Features
8 Pins
supply voltage of 5V
0dB voltage gain
Resistance of 2MOhm
INA148UA/2K5 Applications
There are a lot of Texas Instruments INA148UA/2K5 Instrumentational OP Amps applications.
- Micro signal measurement
- Non-polarized electrodes
- MP3
- Oscilloscopes
- Automation control systems
- Test and measurement instruments
- Radiation thermometry transducers
- High speed sample
- Differentiator circuits
- Voltage regulation circuit
