INA141UG4 Overview
Packaging for the buffer amplifier is in the form of a SOIC case. A INSTRUMENTATION AMPLIFIER-type buffer amplifier is shown here. There is a Rail/Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 50μV. Using a supply current of 750μA , this buffer op amp will be able to operate. 1 channels are available on the instrumentation amplifier. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. You should not use op amp above 85°C degrees. A total of 3 elements are present in this linear amplifier. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 36V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 4.5V, it is recommended to keep it higher. This electronic part should be conducted with a dual supply voltage of 18V volts for this part. As a result, linear amplifier's quiescent current is 750μA. There are a maximum of 10 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. It is recommended to keep the buffer amps resistance within the range of 10GOhm.
INA141UG4 Features
8 Pins
supply voltage of 15V
Resistance of 10GOhm
INA141UG4 Applications
There are a lot of Texas Instruments
INA141UG4 Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
