INA133UA Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp ic of the Differential type. The op amp is delivered to you in a Tube case. It is estimated that there will be 8 terminations in the next few months. In this case, there are 8 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 1.5mV. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . An 950μA volt supply current is needed for this linear amplifier to operate. Keeping the voltage gain at 0dB is the best course of action. Op amp ic has 1 channels. 950μA quiescent currents are flowing through buffer op amp. Instrumentation amplifier resistance should stay within the range of 50kOhm.
INA133UA Features
8 Pins
supply voltage of 5V
0dB voltage gain
Resistance of 50kOhm
INA133UA Applications
There are a lot of Texas Instruments INA133UA Instrumentational OP Amps applications.
- Signal amplification
- Video computer boards
- Medical imaging
- Comparator
- Oscilloscopes
- ECG equipment
- Subtraction operation circuits
- Industrial control system
- Radar
- Thermocouples
