INA132UA Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are Differential types of amplifier on the chip. A Tube case is used for delivering the op amp. It is estimated that there will be 8 terminations in the next few months. This linear amplifier should be powered by an 15V battery. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 750μV. This electrical part should be mounted using type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . This op amp can operate from a supply current at 160μA. There should be no change in the voltage gain at 0dB. There are 1 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 5V. There is a quiescent current of 160μA in this operational amplifier circuit. During testing, the buffer amplifier resistance should remain within a range of 80kOhm. There is also another type of analog IC used in this op amp ic that is called a ANALOG CIRCUIT-type IC. It is important to note that this buffer op amp also has the following extra benefit: IT CAN ALSO OPERATE WITH 2.7V TO 36V SINGLE SUPPLY.
INA132UA Features
supply voltage of 15V
0dB voltage gain
Resistance of 80kOhm
INA132UA Applications
There are a lot of Texas Instruments INA132UA Instrumentational OP Amps applications.
- Instrumentation
- Displayers for aircraft and air transportation control systems
- RF cable systems
- Exponential operation circuits
- High input resistance broadband
- Large motor controllers
- Video computer boards
- Proportional counter tubes
- Band-stop filter
- Addition operation circuits
