INA132U/2K5 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. Differential-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. A total of 8 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . A supply current of 160μA can be used to operate this linear amplifier. Voltage gain should remain at 0dB. On the buffer amps, there are 1 channels that can be used. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. There is a quiescent current of 160μA in this operational amplifier circuit. It is important that the linear amplifier resistance stays within the range of 80kOhm. An analog IC known as a ANALOG CIRCUIT is the other type of IC that is used in this op amp ic. It is important to note that this buffer op amp also has the following extra benefit: IT CAN ALSO OPERATE WITH 2.7V TO 36V SINGLE SUPPLY.
INA132U/2K5 Features
8 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 80kOhm
INA132U/2K5 Applications
There are a lot of Texas Instruments INA132U/2K5 Instrumentational OP Amps applications.
- Division circuits
- Digital cameras
- Communication device
- Oscilloscopes
- High-frequency data acquisition systems
- Medical imaging
- Video conversion and routing
- Signal operation
- Voltage regulation circuit
- Signal transformation
