INA131BPG4 Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Instrumentation-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 15V battery. The op amp ic has an array of 8 pins on it. Op amp rates 50μV as input offset voltage. For this electrical component, Through Hole is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 2.2mA supply current, this operational amplifier ics can be operated. A instrumentation amplifier like this has 1 circuits. 3 elements make up the design of this buffer amplifier. The current is quiescent at 2.2mA. During testing, the instrumentation amplifier resistance should remain within a range of 10GOhm.
INA131BPG4 Features
8 Pins
supply voltage of 15V
Resistance of 10GOhm
INA131BPG4 Applications
There are a lot of Texas Instruments
INA131BPG4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
