INA129PA Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. An op amp ic of the Instrumentation type. A Tube case is used for delivering the op amp. The number of terminations approaches 8. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. 8 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 125μV. For this electronic part, it is recommended that you mount it with type Through Hole. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. You can run this op amp ic on 700μA . You should keep the voltage gain at 80dB for the time being. On the buffer amps, there are 1 channels that can be used. There are a total of 3 elements in this linear amplifier. Buffer amplifier has a quiescent current of 700μA. 100GOhm should be the range of resistance for the instrumentation amplifier.
INA129PA Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA129PA Applications
There are a lot of Texas Instruments INA129PA Instrumentational OP Amps applications.
- Large motor controllers
- MP3
- pH (acidity)
- Power control
- Medical instruments
- Television
- E-book readers
- Signal transformation
- Scintillation detectors
- Band-pass filter
