INA126UAG4 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. Op amps are Instrumentation types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 15V. In total, the buffer amplifier consists of 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 500μV. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. The buffer amplifier is capable of operating from a supply current of 175μA . 80dB should be the voltage gain. This op amp ic has 1 circuits. A voltage rating of 2 is indicated for the op amp's operating supply voltage. The quiescent current is 175μA. Linear amplifier resistance should stay within the range of 1GOhm.
INA126UAG4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 1GOhm
INA126UAG4 Applications
There are a lot of Texas Instruments INA126UAG4 Instrumentational OP Amps applications.
- Micro signal measurement
- Weak signal detection
- High/low-pass filter circuit
- Signal operation
- Proportional operation circuits
- Image computer boards
- Commercial audio systems
- Television
- Power control
- Vehicle electronics
