INA126PA Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. The op amp ic has an array of 8 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . As long as the supply current of the chip does not exceed 175μA, this op amp ic can operate. 80dB should remain the voltage gain. Buffer op amp is equipped with 1 channels on the device. The linear amplifier consists of 2 different elements in total. There is an 175μA quiescent current in linear amplifier. It is recommended to keep the instrumentation amplifier resistance within the range of 1GOhm.
INA126PA Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 1GOhm
INA126PA Applications
There are a lot of Texas Instruments INA126PA Instrumentational OP Amps applications.
- Scintillation detectors
- Weighing systems
- Test and measurement instruments
- Fast A/D and D/A converters
- Signal filtering
- High speed sample
- Wireless base stations
- Automatic control
- single/dual op amp sum and difference circuits
- Division circuits
