INA126EA/2K5 Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Instrumentation-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 500μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 175μA . It is recommended to keep the voltage gain at 80dB at all times. This op amp contains 1 circuits. The total number of elements in this buffer amplifier is 2. This linear amplifier pack is based on the TR axis. 175μA quiescent currents are flowing through buffer op amp. In order for the op amp resistance to remain within the 1GOhm range, the op amp should be tested.
INA126EA/2K5 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 1GOhm
INA126EA/2K5 Applications
There are a lot of Texas Instruments
INA126EA/2K5 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
