INA125PG4 Overview
It is packaged in an PDIP-case that protects the operational amplifiers from damage. An op amp of this type is a INSTRUMENTATION AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 16 pins. Op amp ic rates 250μV for input offset voltage. A supply current of 460μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 80dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. It is important to keep in mind that the power supply voltage of this electric component is below 36V, which is suitable. Keeping the linear amplifier's supply voltage above 2.7V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 18V volts. The quiescent current is 460μA. It is important that the op amp resistance stays within the range of 100GOhm.
INA125PG4 Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA125PG4 Applications
There are a lot of Texas Instruments
INA125PG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
