INA122U/2K5E4 Overview
Packaged in a D case, the buffer op amp is ready to use. An op amp ic of the INSTRUMENTATION AMPLIFIER type. The op amp is delivered to you in a Tape and Reel case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Instrumentation Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 50μV for this buffer op amp. 80dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 85°C should be used. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 5V. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 36V. A high supply voltage of more than 2.2V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 18V volts. Currently, linear amplifier is operating with a quiescent current of 60μA. Instrumentation amplifier resistance should stay within the range of 10GOhm.
INA122U/2K5E4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm
INA122U/2K5E4 Applications
There are a lot of Texas Instruments
INA122U/2K5E4 Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
