INA118P Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. There are a total of 8 pins on this op amp. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 125μV. Through Hole is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using a supply current of 350μA , this buffer op amp will be able to operate. 80dB should be the voltage gain. There are 1 channels on the operational amplifiers. According to the specifications of the buffer op amp, the operating supply voltage is rated at 3. The operating supply voltage of the buffer op amp is rated at 36V. Buffer amplifier has a quiescent current of 350μA. It is recommended to keep the buffer amps resistance within the range of 10GOhm.
INA118P Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm
INA118P Applications
There are a lot of Texas Instruments INA118P Instrumentational OP Amps applications.
- Weak signal detection
- ECG equipment
- Ultrasound transducers
- pH (acidity)
- Polarized electrodes
- Car stereo
- Fast A/D and D/A converters
- Tablets
- Exponential operation circuits
- Portable electronic products powered by batteries
