INA115BU Overview
Packaging for the buffer amplifier is in the form of a 16-SOIC (0.295, 7.50mm Width) case. This is a Instrumentation type op amp. Linear amplifier is delivered in a Tube case. During the past two weeks, there have been close to 16 terminations. A total of 16 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. An 16-pin op amp ic is included in the package. The input offset voltage is 50μV. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . A supply current of 2.2mA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 80dB at all times. On the buffer amps, there are 1 channels that can be used. The linear amplifier consists of 3 different elements in total. There is an 2.2mA quiescent current in linear amplifier. The op amp resistance should stay within the range of 10GOhm.
INA115BU Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm
INA115BU Applications
There are a lot of Texas Instruments INA115BU Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Strain gauges
- Switching amplifier
- Tablets
- Commercial audio systems
- Instrumentation
- ECG equipment
- Portable docking station
- Video amplifiers
- Medical instruments
