INA114BU Overview
Packaged in a 16-SOIC (0.295, 7.50mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called Instrumentation-types. Upon delivery, op amp ic is packaged in a Tube case. There have been a total of 16 terminations over the past year. The total number of pins on linear amplifier is 16. Please take in mind that this instrumentation amplifier should be run at 15V. An 16-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 50μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . As long as the supply current of the chip does not exceed 2.2mA, this op amp ic can operate. The voltage gain should stay at 80dB. The op amp ic has 1 channels on it. There is an operating supply voltage rating of 3 for this operational amplifier, which is rated at the manufacturer. 2.2mA quiescent currents are flowing through buffer op amp. Instrumentation amplifier resistance should stay within the range of 10GOhm.
INA114BU Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm
INA114BU Applications
There are a lot of Texas Instruments INA114BU Instrumentational OP Amps applications.
- pH (acidity)
- Radiation thermometry transducers
- Proportional counter tubes
- Multimedia playback equipment
- Industrial control system
- Non-polarized electrodes
- Computer workstations
- Micro signal measurement
- Weak signal detection
- Fast A/D and D/A converters
