INA114BPG4 Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. A Instrumentation-type buffer amplifier is shown here. The op amp is delivered to you in a Tube case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 50μV voltage. This electronic component is recommended to be mounted using the mounting type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using a supply current of 2.2mA , this buffer op amp will be able to operate. It is a member of the 80dB's 80dB family. There are 1 circuits on this op amp. It is possible to count 3 elements on this buffer amplifier. There is an 2.2mA quiescent current in linear amplifier. 10GOhm should be the range of resistance for the instrumentation amplifier.
INA114BPG4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm
INA114BPG4 Applications
There are a lot of Texas Instruments INA114BPG4 Instrumentational OP Amps applications.
- Medical instruments
- Hand-held batteries
- Band-pass filter
- Radar
- Portable docking station
- PDA
- Test equipment
- Signal operation
- Differentiator circuits
- Video data acquisition
