INA106UE4 Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 200μV for input offset voltage. A supply current of 1.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 20dB. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 1 elements in this buffer amplifier. An buffer amplifier is packed in a TUBE-shape according to the design. It is important to keep in mind that the power supply voltage of this electric component is below 36V, which is suitable. Keeping the linear amplifier's supply voltage above 10V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 18V volts. The quiescent current is 1.5mA. It is important that the op amp resistance stays within the range of 110kOhm.
INA106UE4 Features
8 Pins
supply voltage of 15V
20dB voltage gain
Resistance of 110kOhm
INA106UE4 Applications
There are a lot of Texas Instruments
INA106UE4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
