INA106KPG4 Overview
The linear amplifier is packaged in a PDIP case. This is a OPERATIONAL AMPLIFIER type op amp. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 200μV. This op amp can operate from a supply current at 1.5mA. Voltage gain should remain at 20dB. The temperature should not be lower than -40°C for operational amplifier ics to operate. Use op amps only at temperatures no higher than 85°C. This linear amplifier has a total of 1 elements. With regard to the supply voltage, this electrical component is capable of working from under 36V. It is advised to keep the op amp's supply voltage higher than 10V. You should conduct this electronic component under the dual supply voltage of 18V. Buffer amplifier has a quiescent current of 1.5mA. Instrumentation amplifier resistance should remain within the range of 110kOhm.
INA106KPG4 Features
8 Pins
supply voltage of 15V
20dB voltage gain
Resistance of 110kOhm
INA106KPG4 Applications
There are a lot of Texas Instruments
INA106KPG4 Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
