INA101CM Overview
There is a TO-100-10 Metal Can case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 10. There are a total of 10 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. 10 pins are available on the instrumentation amplifier. The input offset voltage is 25μV. For this electrical component, Through Hole is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -25°C~85°C for optimal performance. A supply current of 6.7mA can be used to operate this linear amplifier. 60dB should remain the voltage gain. There are a total of 1 channels available on the op amps. The total number of elements in this buffer amplifier is 3. As a result, linear amplifier's quiescent current is 6.7mA. It is recommended to keep the instrumentation amplifier resistance within the range of 10GOhm.
INA101CM Features
10 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 10GOhm
INA101CM Applications
There are a lot of Texas Instruments INA101CM Instrumentational OP Amps applications.
- Hand-held batteries
- Voltage regulation circuit
- Car stereo
- Communication device
- Measurements of Wheatstone bridge
- Active probe
- Industrial control system
- Communication
- Video amplifiers
- Automatic control
