DS90LV110TMTCX/NOPB Overview
It is available in the case 28-TSSOP (0.173, 4.40mm Width) for this cut smart buffer. Tape & Reel (TR) is the form in which it is packaged. For normal operation, 400MHz is the maximum value. There are 28 terminations in it. With a supply voltage of 3.3V, it is possible to achieve a high level of efficiency. If this is the case, it will be mounted as Surface Mount. Electronic components classified as Fanout Buffer (Distribution) fall into this category. Temperature -40°C~85°C is recommended for reliable performance. This circuit clock should be able to operate on a power supply of 3V~3.6V volts. It has been positioned in the way of Surface Mount. It has a pin count of 28. As a result, the output is LVDS. It is operated using the 28 pins. It belongs to the family of DS90LV110. It is contained in Clock Drivers. There is 3.6V maximum supply voltage (Vsup). To ensure normal operation of the cut smart buffer, the supply voltage (Vsup) should always be kept above 3V. Keeping the supply voltage at 3.3V will ensure maximum efficiency. This method uses the TR packing method.
DS90LV110TMTCX/NOPB Features
28 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
DS90LV110TMTCX/NOPB Applications
There are a lot of Texas Instruments DS90LV110TMTCX/NOPB Clock Buffers & Drivers applications.
- High speed line receiver
- Patient diagnosis
- Fibre channel (FC)
- Medical imaging
- Data center
- Network attached storage
- Medical instruments
- Storage area network
- Car
- DDR4 JEDEC standard LRDIMM design
