DS90LV110ATMTX/NOPB Overview
As far as the case type is concerned, the cut smart buffer is available in 28-TSSOP (0.173, 4.40mm Width). There is a case available for the circuit clock in Tape & Reel (TR). In normal operation, 200MHz is the maximum value. A total of 28 terminations can be found in it. With a voltage of 3.3V, high efficiency is possible. The mount is made up of Surface Mount. Electrical components classified as Fanout Buffer (Distribution) are classified as such. It is recommended to set the temperature to -40°C~85°C in order to ensure reliable performance. In order for it to function, a power source of 3V~3.6V V must be available. Surface Mount is placed within the way of this object. A pin count of 28 can be found on it. The output is set to LVDS. This IC divider operates on 28 pins. It belongs to the family of DS90LV110. A cut smart buffer of this type is contained in Clock Drivers. Vsup is set to 3.6V as the maximum supply voltage. A voltage higher than 3V is necessary for normal operation of the system. When the supply voltage is at 3.3V, the efficiency will be highest. As a result, it employs the TR packing method.
DS90LV110ATMTX/NOPB Features
28 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
DS90LV110ATMTX/NOPB Applications
There are a lot of Texas Instruments DS90LV110ATMTX/NOPB Clock Buffers & Drivers applications.
- Machine made
- High speed line receiver
- High speed industry
- Automatic test equipment
- Medical imaging
- Clock signal level shifting
- Wired communication field
- Clock signal duplication
- Furniture
- Smartphone
