DS42MB200TSQ Overview
There is a package of 48-WFQFN Exposed Pad for easy transportation of this power buffer.Packaged in Tape & Reel (TR) and ready for power buffer.A universal mounting system for easy adaptation.In terms of types, this is a typical Buffer, Multiplexer.For the purpose of working, this op amp buffer requires 3.135V~3.465V voltage.Keeping output quality high requires the cooperation of 2 x 1:2, 2:1 channels.Hence, it facilitates the entry of CML into the system.In order to avoid mal-functioning of the system, it is recommended that the operating temperature is set to -40°C~85°C.To get more pin-to-pin solutions for your special needs, try searching a higher letter such as "DS42MB200" instead of "s".The op amp buffer has 48 terminals that can be found along its length.This splitter can accomplish a great deal of demanding work when supplied with 3.3V voltage.Its pinout starts with 48 pins.There are 48 pins on it.A Surface Mount hole allows it to be mounted on a PCB or other board.It is not recommended to feed the repeter with a voltage higher than 3.465V.The splitter must have at least 3.13V to be able to start up.The spliter supports a total of 1 outputs.
DS42MB200TSQ Features
2 x 1:2, 2:1 channels.
1 outputs.
DS42MB200TSQ Applications
There are a lot of Texas Instruments DS42MB200TSQ Signal Buffers, Repeaters, Splitters applications.
- Industrial/Embedded PC
- Clock Distribution
- Servers
- Communications Switchers
- Backplane Interconnect
- Protection Switching
- Clock Distribution
- Laptop Computers (for External Video Cards)
- Test Equipment
- Portable IPC/HMI
