DRV8834PWP Overview
The package is designed with [0].The part is packaged in a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad case.In general, it is recommended that the part be mounted by Surface Mount.The component connected in General Purposeis compatible with it.2.5V~10.8V volts can be supplied by the device.Drivers controllers operates wDrivers controllershin a range of -40°C~150°C TJdegrees Celsius.There is a motor type Brushed DCavailable.This part has 24termination options.A voltage of 2.5V~10.8Vcan be applied to the load.This amplifier should be operated at 5V.Ideally, it should be mounted in the Surface Mountposition.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is used in the device.Based on the DRV8834part number, it is found.The device has 24 pins.Drivers controllers is possible to access 2outputs.A supply voltage of 10.8Vis required to operate this driver.500mVis maintained as the output voltage.The motor type can be identified as Stepper.Controller ic operates on a supply current of 2.4mA.
DRV8834PWP Features
Applications : General Purpose
Load voltage across the chip 2.5V~10.8V
base on DRV8834 number
designed with 2 outputs
Motor Type classified as Stepper
DRV8834PWP Applications
There are a lot of Texas Instruments
DRV8834PWP motor drivers applications.
- High power LED street light
- Large outdoor LED display
- Commercial office
- Hospitality buildings
- Smart lighting applications
- Automotive applications
- Dome
- Dash
- Footwell lighting
- Indicator
