DRV10975PWP Overview
The design contains a Tubepackage.This part is packed in a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad case.Drivers controllers is recommended that the part be mounted by Surface Mount.For the component connected to [0], it is suitable.This device is capable of supplying voltages up to 6.5V~18V volts.Operation temperature ranges from -40°C~125°C TJ.This motor type can be categorized as Brushless DC (BLDC).A total of 24terminations are available in this part.There is the option of applying the voltage to the load at the rate of 6.5V~18V.Drivers controllers is very important to keep in mind that this amplifier should be operated at 12V.Maintain a current of 1.5A for the part output.An analog IC with the model number BRUSHLESS DC MOTOR CONTROLLERis employed in the device.This can be determined by looking at the DRV10975 part number.24pins are present on the device.There are a total of 1outputs available.A voltage of 12V is used as the supply voltage for this driver.Continually maintains the output voltage at 5V.Controller ic uses 11mAas the supply current for Controller ics operation.Controller ic is possible to achieve the frequency of 100kHz.
DRV10975PWP Features
Applications : Appliance
Load voltage across the chip 6.5V~18V
base on DRV10975 number
designed with 1 outputs
DRV10975PWP Applications
There are a lot of Texas Instruments
DRV10975PWP motor drivers applications.
- Dash
- Footwell lighting
- Indicator
- Telltale lights
- Infotainment backlighting
- Tail lights
- Turn signals
- Brake lights
- CHMSL (center high-mount stop lamps)
- parking lights
