DF1760P Overview
The analogue to digital converter is designed with 20 Bits.The AD converter is embedded in the 28-DIP (0.600, 15.24mm) package.The ADC converter is packaged in the way of Tube.There are 28 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The is equipped with 28 pin count.This electronic AD converter is mounted in the way of Through Hole.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 48k Hz.The input type of this electronic AD converter is Single Ended.This electronic digital converter is configured in such a way that ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 28 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in DSP Peripherals.It belongs to DF1760 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.A supply type can be classified by a Analog, Digital, Dual number.Through Hole is a device that can be mounted on the digital converter.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.This electrical digital converter operates from a supply voltage of 5V.The ADC converter operates from 5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 460mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 275mW.The conversion rate of this electrical AD converter is calculated as 48 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. There are 2 converters, which will convert numbers to words and figures to words. The maximal supply current amounts to 55mA.
DF1760P Features
28 basic kinds of terminations
28 pin count
Minimal supply voltage of 4.75V
5V power supplies
DF1760P Applications
There are a lot of Texas Instruments DF1760P ADC applications.
- Scientific instruments.
- Medical Instrumentation and medical imaging
- In-building wireless telephony
- Handheld Terminal Interface
- 4-channel data acquisition
- Spectrum Analysis
- High Speed Data Acquisition for PCs
- Multicarrier, multimode digital receivers
- Communication Systems
- AC motor control
