CY74FCT574TSOC Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. D flip flop is included in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas its output configuration. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 4.75V~5.25V volts, it operates. -40°C~85°C TAis the operating temperature. This D latch has the type D-Type. JK flip flop belongs to the 74FCTseries of FPGAs. A total of 1elements are contained within it. As a result, it consumes 200μA quiescent current and is not affected by external forces. The number of terminations is 20. JK flip flop belongs to 74FCT574 family. Power is supplied from a voltage of 5V volts. A 5pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as FCT. There is an electronic component mounted in the way of Surface Mount. There are 20pins on it. This device has Positive Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. 8bits are used in its design. Despite its superior flexibility, it relies on 8 circuits to achieve it. An electrical current of 5V volts is applied to it. The flip flop has 2ports embedded within it. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. With an output current of 64mA, this device offers maximum design flexibility. It is designed with 3 output lines. A frequency of 250MHzcan be achieved.
CY74FCT574TSOC Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT574TSOC Applications
There are a lot of Texas Instruments CY74FCT574TSOC Flip Flops applications.
- Latch-up performance
- Latch
- Storage registers
- Storage Registers
- Load Control
- Frequency Dividers
- Bus hold
- Event Detectors
- Patented noise
- Buffer registers
