CY29FCT818ATDMB Overview
CDIP is a package containing the embedded device. Taking the total number of terminations on the chip and adding them up, we get 24. A Rail/Tube case is used to pack it. The part operates at 5V voltage. A total of 1 elements can be found on this part. It is equipped with a pin count of 24. It is recommended that the mount should be done by Through Hole. There is an electronic component in the FCT. It is noted that this chip uses an operating supply voltage of 5V. A total of 8 bits are present on the IC chip. It has a total of zero pins. At temperatures below 125°C, it is recommended for use. Ideally, it should not fall below -55°C. A voltage of 5.5V is employed as the supply voltage. There is a voltage applied to the supply that is greater than 4.5V.
CY29FCT818ATDMB Features
With 24 pins
Operate supply voltage at 5V
CY29FCT818ATDMB Applications
There are a lot of Texas Instruments
CY29FCT818ATDMB Shift Registers applications.
- Data Processors
- Pseudo Random Pattern Generator
- Pulse Extenders
- Pattern Recognizers
- Interconnectors
- Counter
- Data manipulation
- Delay Line
- Generate time delay toward digital circuits
- Parallel data
