CDCVF2510PWR Overview
As a clock IC, it is packaged by the Tape & Reel (TR) method. This clock generator is embedded in the 24-TSSOP (0.173, 4.40mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 24 terminations. Basically, this time clock generator needs a voltage of 3.3V. This clock generator receives its inputs from LVTTL, which is designed to be the clock source. It is possible to access the full performance of the electrical part by implementing 1 circuits. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. It would be possible to supply this clock PLL with 3.6V of power. For safety reasons, this frequency generator's supply voltage should remain above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. The temperature should be set at 0°C~85°C to ensure reliable performance. This electronic component can be classified into PLL Clock Driver. In particular, this clock PLL is designed to be used with microprocessors. CDCVF2510 is the base part number for finding related electronic parts. There is a 24 pin that is available on the digital clock generator. The maximum supply voltage that analog clock generator can handle is 3.3V. The frequency synthesizer features 10 signal outputs to ensure as high a frequency as possible. By operating at a frequency of 175MHz, frequency generator is able to achieve high efficiency. Depending on the load capacitance, the analog clock generator can deliver a value of 25pF. A clock generator ic such as this would be well suited to the TR package.
CDCVF2510PWR Features
Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 25pF
CDCVF2510PWR Applications
There are a lot of Texas Instruments CDCVF2510PWR Clock Generators applications.
- Signal generator
- Skew suppression
- Clock generation systems
- Remote telemetry and instrumentation
- Electronic equipment
- Test and instrumentation equipment
- HDD recorders
- MRI
- Closed circuit systems
- Broadcast communication
