CDCVF2505PWRG4 Overview
Tape & Reel (TR)-method packaging is used for clock ICs. The 8-TSSOP (0.173, 4.40mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 8 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be LVTTL. To access the full performance of the electronic component, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.6V. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. This electronic component is usually classified as a PLL Clock Driver component. The clock-generating IC is a 8-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CDCVF2505. It is possible to connect to the frequency generators via 8 pins. There is a maximum supply voltage of 3.3V that clock generator can handle. This clock generator can be classified as a kind of Clock Drivers in general. 4 signal outputs enable clock PLL to magnify output frequency as high as possible. At a frequency of 200MHz, frequency generator is capable of achieving high efficiency. In terms of load capacitance, analog clock generator is capable of delivering 25pF. This clock generator ic is ideally suited to the TR package.
CDCVF2505PWRG4 Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 25pF
CDCVF2505PWRG4 Applications
There are a lot of Texas Instruments
CDCVF2505PWRG4 Clock Generators applications.
- Automatic test equipment
- Wide area power system
- Digital circuits
- Wireless base station for LTE, LTE-advanced
- Picocells, femtocells and small cells
- Sampling clocks for ADC and DAC
- 1 Gigabit Ethernet
- 10 Gigabit Ethernet
- FPGA and processor clocks
- Line cards used in telephone exchange
