CDCVF111FNR Overview
The clock divider is available in 28-LCC (J-Lead) case. There is a case available for the circuit clock in Tape & Reel (TR). A total of 28 terminations can be found in it. Using a supply voltage of 3.3V allows for high efficiency. In this case, it is set up as Surface Mount. Electrical components classified as Fanout Buffer (Distribution) are classified as such. It is recommended to set the temperature to -40°C~85°C so the system can perform reliably. This circuit clock should be able to operate on a power supply of 3V~3.6V volts. This item is positioned in the way of Surface Mount. The clock buffer contains 28 pins. A 28 pin is used for operation. The structure belongs to the CDCVF111 family of structures. The circuit clock is contained in Clock Drivers. A member of the 111 family, this gadget is a timeing clock. In this case, the maximum supply voltage (Vsup) is set to 3.6V. A voltage higher than 3V is necessary for normal operation of the system. There is a default setting of output 9. Keeping the supply voltage at 3.3V will ensure maximum efficiency. The clock divider consumes 100mA quiescent current, and it is unaffected by external factors. As long as the frequency is 650MHz, it maintains excellent accuracy. In this case, the packing method is TR.
CDCVF111FNR Features
28 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 650MHz frequency
CDCVF111FNR Applications
There are a lot of Texas Instruments CDCVF111FNR Clock Buffers & Drivers applications.
- Radar
- Base station
- Measurement test
- Network
- Hardware accelerator
- Peak detection
- Aviation
- Navigation equipment
- OTN
- High-performance server
