Welcome to Hotenda.com Online Store!

logo
userjoin
Home

CDCV857DGGRG4

CDCV857DGGRG4

CDCV857DGGRG4

Texas Instruments

2.5V PLL Clock Driver CDCV857 Clock Generators 48 Pins 48-TFSOP (0.240, 6.10mm Width) 48 Terminals Surface Mount 2.3V~2.7V Tape & Reel (TR)

SOT-23

CDCV857DGGRG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Contact PlatingGold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-TFSOP (0.240, 6.10mm Width)
Number of Pins 48
Weight 223.195796mg
Operating Temperature0°C~85°C
PackagingTape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part StatusObsolete
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 48
Type PLL Clock Driver
Voltage - Supply 2.3V~2.7V
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Terminal Pitch0.5mm
Frequency 200MHz
Base Part Number CDCV857
Pin Count48
Number of Outputs 10
Operating Supply Voltage2.5V
Supply Voltage-Max (Vsup) 2.7V
Supply Voltage-Min (Vsup) 2.3V
Number of Circuits 1
Nominal Supply Current275mA
Family 857
Output Characteristics 3-STATE
Input Clock
Ratio - Input:Output 1:10
PLL Yes with Bypass
Differential - Input:Output Yes/Yes
Propagation Delay (tpd) 4.5 ns
Divider/Multiplier No/No
Same Edge Skew-Max (tskwd) 0.075 ns
Radiation HardeningNo
RoHS StatusROHS3 Compliant
Lead Free Lead Free
In-Stock:2865 items

CDCV857DGGRG4 Product Details

CDCV857DGGRG4 Overview


A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. A Clock PLL is included with the 48-TFSOP (0.240, 6.10mm Width) package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. There are a total of 48 terminations in this file. For this clock generator ic, a voltage of 2.5V is required. The input of this clock generator is designed to be Clock. 1 circuits are implemented to access the electronic component's full performance. Surface Mount-slots make it easy to mount this electronic component on panels. Clock PLL is capable of receiving a maximum of 2.7V as a supply voltage. A maximum voltage of 2.3V should be used for this frequency generator for safety reasons. As long as there are 2.3V~2.7V supply voltages provided, clock generator ic should work. The temperature should be set at 0°C~85°C to ensure reliable performance. An electrical part such as this one can be classified as a PLL Clock Driver component. In particular, this clock PLL is designed to be used with microprocessors. Related electrical parts can be found for the base part number CDCV857. There is an available 48 pin on the clock generators. In terms of the supply voltage, PLL clock can handle 2.5V volts. The frequency synthesizer features 10 signal outputs to ensure as high a frequency as possible. At 0.075 ns Max, this clock generator offers low timing skew. You can find similar clock generators by searching for the 857 family. High efficiency is achieved when operating at a frequency of 200MHz.

CDCV857DGGRG4 Features


Available in the 48-TFSOP (0.240, 6.10mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V

CDCV857DGGRG4 Applications


There are a lot of Texas Instruments CDCV857DGGRG4 Clock Generators applications.

  • Remote telemetry and instrumentation
  • Digital circuits
  • Clock synchronization
  • Test equipment
  • Carrier synchronization in wired communication
  • FMCW Radar
  • Radiotelephones
  • Radar
  • Sampling clocks for ADC and DAC
  • Navigation, positioning and surveillance system for aircraft, ships and ships

Get Subscriber

Enter Your Email Address, Get the Latest News