CDCV850IDGGRG4 Overview
Tape & Reel (TR)-method packaging is used for clock ICs. This clock generator is embedded in the 48-TFSOP (0.240, 6.10mm Width) package. 48 terminations can be found in frequency generators. This clock generator ic should receive a voltage of 2.5V. There is a Clock PLL called LVTTL, SSTL-2 which is designed to be the input to this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage this clock generator would take is 2.7V. It is safe to use this frequency synthesizer with a supply voltage above 2.3V. As long as you provide 2.3V~2.7V supply voltage, it will work. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. The RF synthesizer is compatible with SSTL-2 logic levels. It has been classified as a PLL Clock Driver electronic part, which means that it is a semiconductor. It is a 48-bit clock PLL designed specifically for microprocessors. You can find related electrical components to the base part number CDCV850. There is a 48 pin that is available on the frequency synthesizers. There is a maximum supply voltage of 2.5V that electronic frequency generator can handle. The clock PLL is generally classified as a Clock Drivers device. 10 signal outputs enable clock PLL to magnify output frequency as high as possible. At maximum 0.075 ns, this analog clock generator has low timing skew. 850-family electronic parts are similar. At frequencies of 140MHz, RF synthesizer achieves high efficiency.
CDCV850IDGGRG4 Features
Available in the 48-TFSOP (0.240, 6.10mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V
CDCV850IDGGRG4 Applications
There are a lot of Texas Instruments CDCV850IDGGRG4 Clock Generators applications.
- DVD add-on cards for multimedia PCs
- PCI express cards
- Deep space exploration
- Wireless base station for LTE, LTE-advanced
- Precision auxiliary angle deflection measurement
- FSK demodulators
- Automatic control system test
- Time to digital converters
- Ultrasound diagnosis
- Frequency synthesis
