CDCLVD2106RHAR Overview
The clock divider is packaged in a 40-VFQFN Exposed Pad case. There is a case available for the circuit clock in Tape & Reel (TR). The maximum value for normal operation is 800MHz. A total of 40 terminations have been found in it. With a supply voltage of 2.5V, high efficiency is possible. As far as I can tell, it is mounted by Surface Mount. The electrical component has a classification of Fanout Buffer (Distribution). Setting the temperature to -40°C~85°C will ensure reliable performance. With a 2.375V~2.625VV power source, it should work. In this case, it is placed in the way of Surface Mount. On this board, there is a pin count of 40. Buffer IC is LVDS that is output. During operation, 40 pins are used. It is a member of the CDCLVD2106 family. The clock divider is contained within Clock Drivers. There is an electronic gadget called CDC in this family. By default, output 12 is set. A voltage of 2.5V is recommended for maximum efficiency. The method is based on TR.
CDCLVD2106RHAR Features
40 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
CDCLVD2106RHAR Applications
There are a lot of Texas Instruments CDCLVD2106RHAR Clock Buffers & Drivers applications.
- DDR4 JEDEC standard RDIMM design
- Hardware accelerator
- FPGA
- Other clock/data distribution
- Information equipment
- Clock signal level shifting
- Oscilloscope and logic analyzer front ends
- Wireless infrastructure equipment
- Network attached storage
- Synchronous digital system
