CDCLVC1106PW Overview
As far as the case type is concerned, the cut smart buffer is available in 14-TSSOP (0.173, 4.40mm Width). There is a case available for the circuit clock in Tube. There are 14 terminations in it. Using a supply voltage of 2.5V allows for high efficiency. Consequently, it will be mounted by Surface Mount. Electronic components classified as Fanout Buffer (Distribution) fall into this category. When the temperature is set to -40°C~85°C, reliable performance is ensured. It should be capable of operating with a power supply of 2.3V~3.6V volts. This item is positioned in the way of Surface Mount. It has a pin count of 14. The 14 pins are used for operation. This object belongs to the CDCLVC1106 family. There is a cut smart buffer contained in Clock Drivers that is used for this purpose. The gadget belongs to the CDC family of clock buffers. There is 2.7V maximum supply voltage (Vsup). A voltage higher than 2.3V is necessary for normal operation of the system. As a default, it is set to output 6. It is powered by a 3.3V volt supply. As long as the frequency is 250MHz, it maintains excellent accuracy.
CDCLVC1106PW Features
14 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 250MHz frequency
CDCLVC1106PW Applications
There are a lot of Texas Instruments CDCLVC1106PW Clock Buffers & Drivers applications.
- DDR4 JEDEC standard LRDIMM design
- Mass storage system
- Edge computing
- Microserver
- Backplane
- High-speed flip-flop
- High speed industry
- Hardware accelerator
- Information equipment
- Machine made
