CDCL6010RGZTG4 Overview
The Tape & Reel (TR) method is used for packaging clock ICs. This clock generator is embedded in the VQFN EP package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result of this, we can find 48 terminations. This clock generator ic should receive a voltage of 1.8V. There is a Clock PLL called LVDS which is designed to be the input to this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. An up to 1.25GHz frequency is provided by this clock-based RF synthesizer. Microprocessor-specific clock PLL with 48 bits. There are 48 pins on the frequency generators that are available for use. There are -40°C operations that can be performed on this clock generator, which has impressive low-temperature performance. With attenuated performance, this RF synthesizer can survive at 85°C. The supply voltage should be maintained at 1.8V for high efficiency. As such, it is often referred to as a kind of Clock Drivers clock PLL. The output frequency can be amplified as high as possible with its 2 signal outputs. As a result of this digital clock generator, there is a low timing skew at 0.064 ns max. In order to supply this clock PLL, a voltage greater than 1.9V is not acceptable. The lowest limit of supply voltage for this RF synthesizer is 1.7V. PLL BASED CLOCK DRIVER logic circuits are primarily constructed using this time clock generator. By operating at a frequency of 1.25GHz, RF synthesizer is able to reali1.25GHze high efficiency.
CDCL6010RGZTG4 Features
Available in the VQFN EP
Supply voltage of 1.8V
Operating supply voltage of 1.8V
CDCL6010RGZTG4 Applications
There are a lot of Texas Instruments CDCL6010RGZTG4 Clock Generators applications.
- Jitter reduction
- Ports
- Picocells, femtocells and small cells
- Digital logic circuits
- Signal generator
- Threshold extension
- Satellite receivers
- Symbol synchronization
- Automatic control system test
- Skew suppression
