CDC351DBRG4 Overview
It is available in the case 24-SSOP (0.209, 5.30mm Width) for this cut smart buffer. In case Tape & Reel (TR), the cut smart buffer is available. It has 24 terminations. Supply voltages of 3.3V are capable of achieving high efficiency. In this case, it is set up as Surface Mount. An electronic component classified as Fanout Buffer (Distribution) is categorized as such. If you wish to ensure reliable performance, you should set the temperature to 0°C~70°C. Any power source will work, as long as it has 3V~3.6VV. This item is positioned in the way of Surface Mount. On this board, there is a pin count of 24. Buffer IC is LVTTL, TRI-State that is output. For operation, 24 pins are used. Basically, it belongs to the same family as the CDC351. It is contained in Clock Drivers. The electronic gadget belongs to the 351 family. A maximum supply voltage (Vsup) is set to 3.6V. It is important to keep the supply voltage (Vsup) above 3V in order to ensure normal operation. There is a default setting of output 10. Keeping the supply voltage at 3.3V is the key to maximizing the efficiency of the system. The clock divider consumes 25mA quiescent current, and it is unaffected by external factors. Despite its low frequency 100MHz, it maintains excellent accuracy. It is based on the TR packing method.
CDC351DBRG4 Features
24 terminations
The operating temperature of 0°C~70°C degrees
Clock Drivers subcategory
at 100MHz frequency
CDC351DBRG4 Applications
There are a lot of Texas Instruments CDC351DBRG4 Clock Buffers & Drivers applications.
- Furniture
- Tower server
- Clock signal format conversion
- Medical imaging
- Synchronous digital system
- Mass storage system
- Information equipment
- Medical instruments
- Measurement test
- Host bus adapter card
