CDC318ADLRG4 Overview
The clock divider is available in 48-BSSOP (0.295, 7.50mm Width) case. There is a Tape & Reel (TR) package attached to it. A total of 48 terminations are present. Supply voltages of 3.3V enable high efficiency. As far as I can tell, it is mounted by Surface Mount. Electrical components classified as Fanout Buffer (Distribution), Data are classified as such. If you wish to ensure reliable performance, you should set the temperature to 0°C~70°C. Any power source will work, as long as it has 3.135V~3.465VV. As a result, it is placed in the way of Surface Mount. It has a pin count of 48. The output is LVTTL, TTL. It is operated using the 48 pins. The CDC318 family contains it. The clock divider is located in Clock Driver. There is an electronic gadget called 318 in this family. Vsup is set to 3.465V as the maximum supply voltage. It is set to output 18 by default. It is recommended to keep the supply voltage at 3.3V to maximize efficiency. A quiescent current of 500μA is consumed by it, and external influences do not affect it. As long as the frequency of the clock switch is set to 100MHz, excellent accuracy can be achieved. In this case, the packing method is TR.
CDC318ADLRG4 Features
48 terminations
The operating temperature of 0°C~70°C degrees
Clock Driver subcategory
at 100MHz frequency
CDC318ADLRG4 Applications
There are a lot of Texas Instruments CDC318ADLRG4 Clock Buffers & Drivers applications.
- High-end consumer electronics
- Measurement test
- Furniture
- Clock signal format conversion
- Line receiver and signal recovery
- OTN
- High speed instrument
- High reliability telecommunication system
- Other clock/data distribution
- Medical imaging
