CDC2586PAHRG4 Overview
Clock generator is packaged in the way of Tape & Reel (TR). A Clock PLL is included with the 52-TQFP package. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 52 terminations found in this file. For this clock generator ic, a voltage of 3.3V is required. As the Clock PLL's input, LVTTL is designed to be used in order to generate the clock signal. For a full understanding of the electronic part's performance, 1 circuits are implemented. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock generators can take up to 3.6V of power as a maximum supply voltageFor safety reasons, this frequency generator's supply voltage should remain above 3V. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. This electronic component is usually classified as a PLL Clock Driver component. Clock PLL is equipped with 52 pin count. These related electrical parts are available for the base part number CDC2586. There are 52 pins that are available on the frequency generator. Supply voltage 3.3V is what time clock generator can handle. A Clock Drivers clock generator is essentially what this device is. 12 signal outputs allow for maximi12ation of output frequency. At 0.5 ns Max, this clock generator offers low timing skew. Using a frequency of 100MHz allows frequency synthesizer to achieve high efficiencies.
CDC2586PAHRG4 Features
Available in the 52-TQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDC2586PAHRG4 Applications
There are a lot of Texas Instruments CDC2586PAHRG4 Clock Generators applications.
- Digital logic circuits
- Phase modulation cellular systems
- Wi-Fi routers
- Peripheral devices
- Threshold extension
- Digital HDTV systems
- MRI
- Coherent detection of the signal
- Microwave backhaul IF
- Radar
