CDC2586PAHG4 Overview
In order to package it as a clock IC, the Tray package is used. Clock PLL is embedded in the 52-TQFP package. This clock generator ic can sustain 260 degrees of temperature during reflowing. In it, there are 52 terminations to be found. To operate this time clock generator, 3.3V voltage should be applied. LVTTL is designed for clock generator's input. To access the full performance of the electronic component, 1 circuits are implemented. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageThis frequency synthesizer requires a supply voltage above 3V to be safe. As long as you provide 3V~3.6V supply voltage, it will work. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. It is possible to classify this electronic component as a PLL Clock Driver. In this IC, a 52-bit frequency generator is designed specifically for use in microprocessors. Related electrical parts can be found for the base part number CDC2586. Clock generator is designed with 52 pins. In terms of the supply voltage, analog clock generator can handle 3.3V volts. In general, this clock PLL is considered a Clock Drivers device. Clock PLL is facilitated with 12 signal outputs to magnify output frequency as high as possible. The maximal same edge skew (tskwd) can not be exceeded. When operated at 100MHz, frequency synthesizer achieves high efficiency.
CDC2586PAHG4 Features
Available in the 52-TQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDC2586PAHG4 Applications
There are a lot of Texas Instruments CDC2586PAHG4 Clock Generators applications.
- High-speed optical transport network (OTN)
- Clock recovery
- Communication infrastructure
- Small signal recovery
- HDD recorders
- Wi-Fi routers
- Ports
- Time to digital converters
- Symbol synchronization
- Pagers
