CDC2582PAHG4 Overview
It is packaged using the Tray method since it is a clock IC. Clock PLL is embedded in the 52-TQFP package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 52 terminations can be found in frequency synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. In this clock generator, LVPECL is used as the input to the clock. A total of 1 circuits are implemented to access the full performance of the electrical part. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageKeeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There should be 3V~3.6V provided with this RF synthesizer. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. This is a clock generator compatible with LVTTL logic levels. As far as this electronic part is concerned, it can be classified as a PLL Clock Driver component. There is a 52-bit clock-generating IC built specifically for microprocessors in this frequency generator. You can find related electrical components to the base part number CDC2582. There are 52 pins on the frequency generator that are available for use. PLL clock can handle a voltage of 3.3V as its supply voltage. And basically, this clock generator is often classified as a kind of Clock Drivers. The output frequency can be amplified as high as possible with its 12 signal outputs. Low timing skew is offered by this RF synthesizer at maximum 0.5 ns. At 100MHz, frequency synthesizer achieves high efficiency.
CDC2582PAHG4 Features
Available in the 52-TQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDC2582PAHG4 Applications
There are a lot of Texas Instruments CDC2582PAHG4 Clock Generators applications.
- Microprocessor clock multipliers
- CB radios
- Tracking filters
- Main oscillator in receiver
- Melting
- Digital HDTV systems
- Pagers
- Radio receivers
- FM demodulation networks for FM operations
- FSK demodulators
