CDC2536DBG4 Overview
As a clock IC, it uses the Tube package. 28-SSOP (0.209, 5.30mm Width) contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 28 terminations. For this clock generator ic, a voltage of 3.3V is required. This Clock PLL will be fed by LVTTL as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. The Surface Mount allows this electrical component to be easily installed on the panel. For safety reasons, this frequency generator's supply voltage should remain above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at 0°C~70°C. This is an electronic part that can be classified as a PLL Clock Driver in this case. In particular, this clock PLL is designed to be used with microprocessors. CDC2536 is the base part number for finding related electronic parts. There is a 28 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 3.3V. Clock Drivers-type frequency generators are usually classified as this type. 6 signal outputs allow for maximi6ation of output frequency. At 0.5 ns Max, this analog clock generator exhibits low timing skew. At a frequency of 100MHz, the system can achieve high efficiency.
CDC2536DBG4 Features
Available in the 28-SSOP (0.209, 5.30mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDC2536DBG4 Applications
There are a lot of Texas Instruments
CDC2536DBG4 Clock Generators applications.
- Sampling clocks for ADC and DAC
- 1 Gigabit Ethernet
- 10 Gigabit Ethernet
- FPGA and processor clocks
- Line cards used in telephone exchange
- Fiber Channel
- PCI express cards
- Infotainment systems
- Medical equipment
- Multi-function printers
