Welcome to Hotenda.com Online Store!

logo
userjoin
Home

CDC2509CPWG4

CDC2509CPWG4

CDC2509CPWG4

Texas Instruments

3.3V PLL Clock Driver CDC2509 Clock Generators 24 Pins 24-TSSOP (0.173, 4.40mm Width) 24 Terminals Surface Mount 3V~3.6V Tube

SOT-23

CDC2509CPWG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Lifecycle Status NRND (Last Updated: 6 days ago)
Contact PlatingGold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-TSSOP (0.173, 4.40mm Width)
Number of Pins 24
Weight 89.499445mg
Operating Temperature0°C~85°C
PackagingTube
JESD-609 Code e4
Pbfree Code yes
Part StatusNot For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
Type PLL Clock Driver
Subcategory Clock Drivers
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch0.65mm
Frequency 125MHz
Base Part Number CDC2509
Pin Count24
Number of Outputs 9
Operating Supply Voltage3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Load Capacitance30pF
Nominal Supply Current10μA
Power Dissipation700mW
Output Characteristics SERIES-RESISTOR
Input LVTTL
Ratio - Input:Output 1:9
PLL Yes with Bypass
Differential - Input:Output No/No
Same Edge Skew-Max (tskwd) 0.2 ns
Height 1.2mm
Length 7.8mm
Width 4.4mm
Thickness 1mm
Radiation HardeningNo
RoHS StatusROHS3 Compliant
Lead Free Lead Free
In-Stock:3954 items

Pricing & Ordering

QuantityUnit PriceExt. Price
60$9.33567$560.1402

CDC2509CPWG4 Product Details

CDC2509CPWG4 Overview


In order to package it as a clock IC, the Tube package is used. This clock generator is embedded in the 24-TSSOP (0.173, 4.40mm Width) package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. There are a total of 24 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. LVTTL is designed for clock generator's input. Using 1 circuits, the electronic part's full performance can be accessed. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. For safety reasons, this frequency generator's supply voltage should remain above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Test statistics estimate a temperature of 0°C~85°C, which should be set as the ambient temperature. PLL Clock Driver is the type of electrical part that this component is classified as. There is a 24-bit clock-generating IC built specifically for microprocessors in this frequency generator. It is possible to find its related electronic parts by searching for the base part number CDC2509. PF synthesizers is equipped with 24 pins. Time clock generator can handle a voltage of 3.3V as the supply voltage. As a result, it is commonly classified as a type of Clock Drivers clock PLL. 9 signal outputs allow for maximi9ation of output frequency. There is a low timing skew at 0.2 nsmax with this RF synthesizer. At 125MHz, frequency synthesizer achieves high efficiency. Time clock generator is capable of delivering a load capacitance of 30pF.

CDC2509CPWG4 Features


Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 30pF

CDC2509CPWG4 Applications


There are a lot of Texas Instruments CDC2509CPWG4 Clock Generators applications.

  • Modems
  • Mechanical devices
  • Wide area power system
  • Bluetooth receivers
  • Televisions
  • Frequency synthesis
  • Simple clock clean-up circuits
  • Cable television converter boxes
  • Set-top boxes
  • Various decoding circuits

Get Subscriber

Enter Your Email Address, Get the Latest News