Welcome to Hotenda.com Online Store!

logo
userjoin
Home

CDC2509BPWG4

CDC2509BPWG4

CDC2509BPWG4

Texas Instruments

3.3V PLL Clock Driver CDC2509 Clock Generators 24 Pins 24-TSSOP (0.173, 4.40mm Width) 24 Terminals Surface Mount 3V~3.6V Tube

SOT-23

CDC2509BPWG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Contact PlatingGold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-TSSOP (0.173, 4.40mm Width)
Number of Pins 24
Weight 89.499445mg
Operating Temperature0°C~70°C
PackagingTube
JESD-609 Code e4
Part StatusObsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
Type PLL Clock Driver
Subcategory Clock Drivers
Technology BICMOS
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch0.65mm
Frequency 125MHz
Base Part Number CDC2509
Pin Count24
Number of Outputs 9
Operating Supply Voltage3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Nominal Supply Current10μA
Power Dissipation700mW
Quiescent Current10μA
Output Characteristics SERIES-RESISTOR
Input LVTTL
Ratio - Input:Output 1:9
PLL Yes with Bypass
Differential - Input:Output No/No
Same Edge Skew-Max (tskwd) 0.2 ns
Length 7.8mm
Width 4.4mm
Radiation HardeningNo
RoHS StatusROHS3 Compliant
Lead Free Lead Free
In-Stock:4178 items

CDC2509BPWG4 Product Details

CDC2509BPWG4 Overview


This clock IC is packaged using the Tube method. The 24-TSSOP (0.173, 4.40mm Width) package includes this clock generator. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. In it, there are 24 terminations to be found. This time clock generator should be voltaged at 3.3V. A clock generator's input is called LVTTL and it is designed as the input for this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. With the Surface Mount, it is easy to install this electric component on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageThis frequency synthesizer requires a supply voltage above 3V to be safe. This clock PLL works with a supply voltage of 3V~3.6V. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. A PLL Clock Driver is a classification for the electronic part in question. Microprocessors are specifically designed to use this clock-generating IC, which has a 24-bit output. This part number CDC2509 is related to the following electrical components. PF synthesizers is equipped with 24 pins. PLL clock can handle a voltage of 3.3V as its supply voltage. The device is usually classified as a type of Clock Drivers device. Clock PLL has 9 signal outputs to maximi9e output frequency. There is a low timing skew at 0.2 nsmax with this RF synthesizer. When operated at 125MHz, frequency synthesizer achieves high efficiency.

CDC2509BPWG4 Features


Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V


CDC2509BPWG4 Applications


There are a lot of Texas Instruments
CDC2509BPWG4 Clock Generators applications.


  • Digital circuits
  • Wireless base station for LTE, LTE-advanced
  • Picocells, femtocells and small cells
  • Sampling clocks for ADC and DAC
  • 1 Gigabit Ethernet
  • 10 Gigabit Ethernet
  • FPGA and processor clocks
  • Line cards used in telephone exchange
  • Fiber Channel
  • PCI express cards

Get Subscriber

Enter Your Email Address, Get the Latest News