Name: CD74HCT4316E
Brand: Texas Instruments
SKU: CD74HCT4316E
Price: 0.30000 USD
Availability: InStock

new-10%

CD74HCT4316E

Manufacturer part number:CD74HCT4316E

Manufacturer:Texas Instruments

Description:37ns, 37ns SPST - NO 170Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4316 16 Pins 100nA 4.5V 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:CD74HCT4316E Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	951.693491mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	170Ohm
Additional Feature	ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY
Subcategory	Multiplexer or Switches
Technology	CMOS
Number of Functions	4
Supply Voltage	4.5V
Base Part Number	74HCT4316
Pin Count	16
Operating Supply Voltage	5V
Polarity	Non-Inverting
Power Supplies	5V
Number of Channels	4
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Max Supply Current	16μA
Throw Configuration	SPST
Turn On Delay Time	53 ns
Input Voltage (Max)	6V
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	170Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	37ns, 37ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Signal Current-Max	0.025A
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HCT4316E Product Details

CD74HCT4316E Overview

This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. It is mounted in the position Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -55°C~125°C TA. Total terminations are 16. As a result of its 4 channels, this electronic component provides high-quality output. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. This electrical component is included in the 16 series of products. Unlike digital switches, these are based on SPST - NO switching circuits. Search with 74HCT4316 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 170Ohm. The functions of 16 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended that the electrical component receives a voltage of 4.5V. If put voltage greater than 16μA on the device, damage may be caused to the analogue multiplexer. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5V. For dual power supplies, a voltage of at least 1V should be attached. Operating voltages range from 5V. There are 200MHz bandwidths for data transfer. Don't forget the additional features of this electronic part, such as: ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY.