CD74HCT4053MG4 Overview
Due to its SOIC packaging, the electronic part is convenient for international shipping. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 2 channels. Turning on and running the electrical part should be easy with a 4.5V voltage supply. Electronic part bodies are injected with 16 pins. Internally, this switch multiplexer has a resistance of 130Ohm. You can find the functions of the 16 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 4.5V. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5V. If you are using a dual power supply, you should attach at least 1V. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. It can operate from 5V operating voltages. Operating 6 inputs is required. 200MHz bandwidths enable data to be transferred. Temperatures over 125°C should not be allowed for the multiplexer to operate. The analog switch ics includes 3 outputs. Its conductivity is 2-bit.
CD74HCT4053MG4 Features
2 Channels
Bandwidth: 200MHz
2-Bit
CD74HCT4053MG4 Applications
There are a lot of Texas Instruments
CD74HCT4053MG4 Analog Switches & Multiplexers ICs applications.
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
