CD74HCT373MG4 Overview
20-SOIC (0.295, 7.50mm Width) contains it. Tube is the packaging method. The output it is configured with uses Tri-State. There is D-Type Transparent Latch logic type for this electrical device. According to Surface Mount, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. The temperature at which the machine is operating is -55°C~125°C. The 74HCT series contains FPGAs of this type. Electronic parts with 8 bits are designed for this application. This device has 20 terminations. As a member of the 74HCT373 family, it falls under that category. A 5V voltage supply is required for operation. The 20 pind are equipped with it. HCT is the family of this electronic device. This board has 20 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. This device has 2 ports. The part belongs to the Bus Driver/Transceiver subcategory. The system is powered by 5V sources. With an output current of 6mA, it is highly flexible in terms of design. Optimal efficiency requires 5V as the supply voltage. A binary equivalent of the input line is generated by the 8 output lines. As far as external factors are concerned, it consumes 8μA of quiescent current without getting affected by them. In total, it has 1 elements.
CD74HCT373MG4 Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
1 elements
CD74HCT373MG4 Applications
There are a lot of Texas Instruments CD74HCT373MG4 Latches applications.
- Relay replacement
- Registers
- Double bus register system
- Shift left register
- Frequency
- Motor Drives
- Accumulator Registers
- BCD counting
- Four-bit storage with output enable
- Buffer register
